Industrial Wastewater Treatment Solutions
Project-Specific Treatment Engineering for Complex Industrial Effluents
Project-specific industrial wastewater treatment solutions engineered around wastewater characteristics, treatment capacity, effluent requirements and site conditions — from process engineering and modular systems to engineered equipment, plant upgrades and EPC cooperation.
Project-Specific Design Basis
Industrial Wastewater Requires Project-Specific Treatment Engineering
Wastewater characteristics can vary significantly between industries, production processes and operating conditions. Treatment configuration should therefore be developed from the actual wastewater characteristics, treatment objectives and project conditions — rather than selected as a fixed standard process.
01
Wastewater Source
Industry, production process and the wastewater streams generated by the facility.
02
Wastewater Characteristics
Organic load, suspended solids, oil, metals, salinity, nutrients or other project-relevant contaminants.
03
Flow & Pollutant Load
Average and peak flow, operating pattern and variations in pollutant loading.
04
Required Effluent Quality
Applicable discharge limits or required treated-water quality.
05
Reuse Objectives
Reuse requirements where treated wastewater is intended for recycling or further treatment.
06
Site Conditions
Available space, utilities, existing infrastructure, installation constraints and other relevant site interfaces.
Design Basis
Wastewater Characteristics + Flow & Load + Required Effluent Quality + Reuse Objectives + Site Conditions → Treatment Process & System Configuration
Two facilities in the same industry may therefore require different treatment processes. The final configuration is developed according to the confirmed project design basis.
Process Configuration
Treatment Processes Configured Around Wastewater Characteristics
The treatment route is developed from the confirmed wastewater characteristics, pollutant load and required effluent quality. Depending on the project, physicochemical, biological, advanced and reuse-treatment stages can be combined into an appropriate process configuration.
Main Water Line
Wastewater Collection & Equalization
Pretreatment
Physicochemical Treatment
When requiredBiological Treatment
When applicableAdvanced / Tertiary Treatment
When requiredMembrane / Reuse Treatment
When requiredDischarge or Reuse
Sludge / Solids Line
Sludge / Solids Handling
Residuals from pretreatment, physicochemical and biological stages are directed to sludge / solids handling. Final management depends on sludge characteristics and local project requirements.
Not every project requires every treatment stage. The final process configuration is determined by confirmed wastewater characteristics, treatment objectives and the project design basis.
Typical Process Capabilities
Pretreatment & Physicochemical
Screening & equalization · pH adjustment · coagulation / flocculation · DAF / sedimentation
Biological Treatment
Activated sludge · MBBR · MBR where applicable
Advanced Treatment & Reuse
Filtration · UF / RO where required · advanced oxidation where required
Sludge & Residuals
Sludge collection · thickening · dewatering
These are examples of treatment capabilities, not a fixed standard process.
Industry Applications
Industrial Wastewater Treatment Across Different Industries
Industrial wastewater varies by production process, raw materials and operating conditions. SYNERAQUA evaluates each project according to its wastewater characteristics and treatment objectives, with experience applicable across a range of industrial sectors.
01Food & Beverage Processing
Organic wastewater from food processing, beverage production, cleaning and related production operations.
02Chemical & Petrochemical
Complex process effluents that may require combinations of physicochemical, biological or advanced treatment.
03Pharmaceutical & Fine Chemicals
Process wastewater containing project-specific organic compounds, salinity or other contaminants requiring detailed evaluation.
04Metal Finishing & Surface Treatment
Rinse water and process wastewater that may contain metals, oils, phosphates or other process-specific contaminants.
05Electronics & Manufacturing
Process wastewater and cleaning streams generated by fabrication, component manufacturing and industrial production.
06Pulp, Paper & Textile
Process wastewater with project-specific organic load, suspended solids, colour or other production-related contaminants.
07Mining, Energy & Produced Water
Produced water and industrial process water requiring treatment according to wastewater characteristics, discharge requirements and site conditions.
08Industrial Parks & Integrated Facilities
Centralized wastewater treatment for facilities receiving multiple industrial wastewater streams with different characteristics.
Industry sector provides the application context. The final treatment process is configured according to the confirmed wastewater characteristics, flow and pollutant load, required effluent quality and project design basis.
Project Scope
From Process Engineering to Treatment System Delivery
Industrial wastewater projects differ in both technical requirements and commercial structure. SYNERAQUA can support different stages and scopes of a project — from process engineering and system design to modular treatment systems, engineered equipment, plant upgrades and EPC cooperation where appropriate.
Flexible participation according to project requirements and agreed responsibilities.
01
Process Engineering & System Design
Process route definition, system design and technical documentation developed from the confirmed wastewater analysis and project design basis.
02
Modular / Skid-Mounted Treatment Systems
Factory-assembled treatment modules and skid-mounted systems configured according to capacity, transport requirements and site interface conditions.
03
Engineered Equipment Packages
Treatment equipment, dosing systems and custom-engineered units supplied according to the defined technical and delivery scope.
04
Existing WWTP Upgrade & Retrofit
Review of existing treatment systems and development of upgrade or retrofit measures according to current treatment objectives and site conditions.
05
Equipment Integration & Supply
Integration of pumps, piping, instrumentation and control systems into treatment units or equipment packages according to the project scope.
06
EPC Cooperation — Where Appropriate
Where the agreed commercial responsibility includes engineering, procurement and construction, SYNERAQUA can participate under an EPC cooperation model.
Scope Definition
The final SYNERAQUA scope is defined according to project requirements and agreed commercial responsibilities. EPC is one possible cooperation model — not a mandatory delivery structure.
Engineering & Project Experience
Engineering Capability Supported by Manufacturing & Project Experience
Treatment concepts must ultimately be translated into practical equipment and systems. SYNERAQUA combines process engineering with fabrication, equipment integration and modular system delivery capabilities, supported by experience in water and wastewater treatment projects.
Engineering & Manufacturing
Learn more about our engineering, manufacturing and factory testing capabilities →Project Experience
View water and wastewater treatment project cases →Project Information
What We Need to Evaluate Your Industrial Wastewater Project
The following information allows our engineering team to assess the treatment approach and preliminary system configuration based on the available project design basis.
You do not need to have every item available before contacting us. Send the information currently available and the remaining requirements can be identified during the preliminary review.
01Wastewater Source & Type
Wastewater source, type and generating process, including separate wastewater streams where applicable.
02Treatment Capacity
Average and peak flow where available.
03Wastewater Characteristics & Analysis
Available influent analysis and key parameters such as pH, COD, BOD, TSS, oil, nutrients, salts, metals or other process-specific contaminants.
04Required Effluent Quality
Applicable discharge limits or reuse-water requirements.
05Existing Treatment System & Site Conditions
Where applicable: existing process, available space, utilities and site constraints.
06Required Project Scope
Engineering, equipment supply, modular system, upgrade, technical support, commissioning or EPC cooperation as applicable.
FAQ
Industrial Wastewater Treatment — Frequently Asked Questions
How is an industrial wastewater treatment process selected?
Can SYNERAQUA treat high-COD or complex industrial wastewater?
Can the system be supplied as modular or skid-mounted equipment?
Can SYNERAQUA upgrade an existing wastewater treatment plant?
What information is required for a technical proposal?
Can SYNERAQUA provide EPC or on-site technical support?
Need an Industrial Wastewater Treatment Solution?
Send us your available wastewater analysis, treatment capacity, required effluent quality and project requirements. Our engineering team can review the available information and discuss the appropriate next steps for your project.
Request a Technical ProposalFor industrial facilities, project owners, EPC contractors, consultants and engineering partners.
