Custom-Engineered Water Treatment Systems & Process Skids
Project-Specific Equipment Integration for Water & Wastewater Treatment
SYNERAQUA designs and manufactures custom water treatment systems, process skids and engineered equipment according to project specifications, process requirements, capacity, site interfaces and delivery scope.
What We Customize
SYNERAQUA custom-engineers water and wastewater treatment systems rather than supplying fixed off-the-shelf packages. Each project is defined by its process requirements, capacity, site interfaces, utility conditions and delivery scope.
01
Process Skids & Packaged Units
Factory-assembled process skids and packaged units integrating pumps, piping, instrumentation and controls for defined treatment duties.
02
Custom Treatment Modules
Modular treatment units configured for pretreatment, biological treatment, separation, disinfection or other process steps according to project requirements.
03
Engineered Water Treatment Equipment
Purpose-built treatment equipment and vessel assemblies engineered to the project design basis and operating conditions.
04
OEM / Project-Specific Equipment Packages
Project-specific equipment packages manufactured, modified and integrated according to customer specifications, drawings and agreed delivery scope.
Engineering & Delivery Workflow
Each custom system is developed through a project-specific engineering and delivery workflow, from confirmed requirements and design basis through manufacturing, factory inspection and delivery.
01
Project Requirements
02
Design Basis / Specifications
03
Engineering & Equipment Selection
04
Detailed Design
05
Manufacturing & Integration
06
Factory Inspection / Testing
07
Delivery
Typical System & Equipment Capabilities
SYNERAQUA engineered equipment supports a broad range of water and wastewater treatment duties. The categories below outline typical capability areas addressed during project engineering.
Pretreatment & Separation
Screening, sedimentation and solid-liquid separation equipment for incoming water and wastewater streams.
Membrane & Advanced Treatment
Membrane filtration, UF/RO systems and advanced treatment modules configured where required by the project design basis.
Chemical & Process Systems
Dosing, mixing and process skids integrating pumps, piping, instrumentation and controls for defined duties.
Biological & Sludge Treatment
Biological treatment and sludge-handling equipment arranged according to the confirmed process requirements.
The equipment shown is representative. Final process selection and scope are defined by confirmed wastewater characteristics, required effluent quality, capacity and the project design basis.
Modular Integration & Manufacturing
Custom systems and equipment can be assembled and integrated in the workshop according to project scope. Skid assembly, structural fabrication, piping, equipment installation, instrumentation and control integration can be completed before delivery, with factory inspection and testing arranged according to project requirements.
- Skid assembly and structural fabrication
- Membrane rack and equipment integration
- Piping and process interconnection
- Equipment installation and alignment
- Instrumentation and control panels
- Factory inspection and testing according to project scope
Learn more about SYNERAQUA's engineering, manufacturing and factory testing capabilities →
Cooperation Models
Different Starting Points. One Engineering & Manufacturing Partner.
SYNERAQUA works with project owners, EPC contractors, consultants, system integrators and engineering partners through cooperation models defined by the project requirements and agreed scope.
01
Design + Manufacture
From project requirements and design basis through equipment engineering, manufacturing, integration and factory inspection and testing according to the agreed scope.
02
Build to Specification / Drawings
Equipment manufactured according to customer-approved drawings, datasheets, technical specifications and defined project interfaces.
03
Equipment Package Supply
Individual equipment, process skids or integrated equipment packages supplied according to the defined project and delivery scope.
04
OEM / Engineering Partner Cooperation
Project-specific manufacturing and engineering support for EPC contractors, consultants, system integrators and equipment partners.
What We Need to Engineer Your System
The following information is used to define the process design, equipment configuration and delivery scope. Where some data is not yet available, our engineering team can help identify the remaining requirements.
01
Process / Technical Requirements
Treatment objective, process requirements, applicable standards, PFD, P&ID, drawings, datasheets or technical specifications where available.
02
Capacity
Required treatment capacity and peak or continuous flow conditions.
03
Water / Wastewater Data
Available water or wastewater analysis, process conditions and required treated-water or effluent quality where relevant.
04
Site & Utility
Site layout, available space, power, water and other utility interfaces.
05
Delivery Scope
Required modular configuration, automation level, installation or commissioning support, redundancy and other project-specific delivery requirements.
Frequently Asked Questions
Common questions about custom-engineered water treatment systems, delivery scope and cooperation.
Can you manufacture equipment according to our drawings or specifications?
Can SYNERAQUA provide both engineering and manufacturing?
Can equipment be supplied as skid-mounted or containerized modules?
Can PLC/HMI, instrumentation and control systems be integrated?
What materials can be used for custom equipment?
What information is required for quotation or technical evaluation?
Need a Custom-Engineered Water Treatment System?
Share your specifications, drawings or project requirements with our engineering team to evaluate an appropriate equipment or system configuration.
Discuss Your Equipment Requirements →For project owners, EPC contractors, consultants and engineering partners worldwide.
